Measurement system
Page 1 of 1
Measurement system
Alessandro Wed Jul 22, 2009 12:38 am
The system used to measure the temperature is as follows:
The system is a common mass (GND, the mass of the electricity grid)!
All points GND are connected to each other.
The Vin (1V) is used to generate a current of 10.0*10-6A in thermometer! (Required to operate)
V+ and V- (+10V , -10V) power the converter V/I
The system is a common mass (GND, the mass of the electricity grid)!
All points GND are connected to each other.
The Vin (1V) is used to generate a current of 10.0*10-6A in thermometer! (Required to operate)
V+ and V- (+10V , -10V) power the converter V/I
Alessandro- Posts : 42
Join date : 2008-12-11
Location : Roma
Similar topics» RIN measurement of RF2 and RF3
» Radiative cooling system with three rings cold directed
» The built-in Web interface for System Switch/Multimeter 3706
» New test at ambient temperature (Check operation of the data acquisition system)
» System Switch/Multimeter and Plug-In Card - Instrument Model 3706
» Radiative cooling system with three rings cold directed
» The built-in Web interface for System Switch/Multimeter 3706
» New test at ambient temperature (Check operation of the data acquisition system)
» System Switch/Multimeter and Plug-In Card - Instrument Model 3706
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|