Thermal Camera: Try to fit Central Heating (North bench)
Page 1 of 1
Thermal Camera: Try to fit Central Heating (North bench)
mdipaolo Wed Feb 18, 2009 7:57 pm
With the Help of entry to LogBook ToR Cascina "MatLab
Images", I report the curve of Ring + Central Heating until to 12th
February, when we replacementd the Beam splitter.
In the following the images of the thermal camera:
Diameter of the Ring is 22.5 cm.
Concernig to the Central heating:
try to fit it:
The function is:
f(x) = 0.51*exp(-((x-35.46)/3.95)^2)+ 3.03*exp(-((x-29.41)/9.7)^2)+ 21.78*exp(-((x-59.61)/115.1)^2)+ 7.34*exp(-((x+25.74)/43.06)^2)
For detail report the image as function of ray in cm
Images", I report the curve of Ring + Central Heating until to 12th
February, when we replacementd the Beam splitter.
In the following the images of the thermal camera:
Diameter of the Ring is 22.5 cm.
Concernig to the Central heating:
try to fit it:
The function is:
f(x) = 0.51*exp(-((x-35.46)/3.95)^2)+ 3.03*exp(-((x-29.41)/9.7)^2)+ 21.78*exp(-((x-59.61)/115.1)^2)+ 7.34*exp(-((x+25.74)/43.06)^2)
For detail report the image as function of ray in cm
mdipaolo- Posts : 106
Join date : 2008-11-05
Similar topics» Phase Camera 1: Meaurement with Central Spot Heating WI 14 Jan 09
» Attenuator for Central Heating
» Thermal camera installation on NI TCS bench and alignment checks
» Calibration of the Attenuator (Central Heating)
» Central Heating attenuator holder preliminary design
» Attenuator for Central Heating
» Thermal camera installation on NI TCS bench and alignment checks
» Calibration of the Attenuator (Central Heating)
» Central Heating attenuator holder preliminary design
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|