Calibration of the Attenuator (Central Heating)
2 posters
Page 1 of 1
Calibration of the Attenuator (Central Heating)
We have calibrated the attenuator. It has been fixed to a particular angle in order to have the central heating power beetwen some mW to 100 mW.
The angle of Attenuator is 25 for both bench.
The Maximum power for north bench is 146 mW, for the other bench (WI), instead, the maximum power is 176 mW.
For both bench the minimum power is around 3 mW.
https://i.servimg.com/u/f63/13/23/56/35/chpowe11.jpg
https://i.servimg.com/u/f63/13/23/56/35/chpowe10.jpg
The angle of Attenuator is 25 for both bench.
The Maximum power for north bench is 146 mW, for the other bench (WI), instead, the maximum power is 176 mW.
For both bench the minimum power is around 3 mW.
https://i.servimg.com/u/f63/13/23/56/35/chpowe11.jpg
https://i.servimg.com/u/f63/13/23/56/35/chpowe10.jpg
Last edited by mdipaolo on Fri Jan 23, 2009 11:40 am; edited 2 times in total
mdipaolo- Posts : 106
Join date : 2008-11-05
Numbers
I think it could be useful if, beside the graphs, also the tables with the numeric values were posted
Alessio- Posts : 127
Join date : 2008-11-07
Age : 52
Location : Rome
Similar topics
» Phase Camera 1: Meaurement with Central Spot Heating WI 14 Jan 09
» Central Heating attenuator holder preliminary design
» Attenuator for Central Heating
» Calibration Curve of the Attenuator
» Thermal Camera: Try to fit Central Heating (North bench)
» Central Heating attenuator holder preliminary design
» Attenuator for Central Heating
» Calibration Curve of the Attenuator
» Thermal Camera: Try to fit Central Heating (North bench)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum