Matlab images of the WI ring
Page 1 of 1
Matlab images of the WI ring
From the Thermal Camera Program, it is possible to save the thermal images as Matlab files. I started from the WI bench. The following files refer to the last position of L3, images taken with 16W on the paper screen. The UP/DOWN directions are reversed for some unknown reason.
Profile in the horizontal direction:
Profile in the vertical direction:
The bright spot is still there, but much weaker than before. From these images it is not possible to infer the dimensions of the ring, since there is no "standard candle".
Profile in the horizontal direction:
Profile in the vertical direction:
The bright spot is still there, but much weaker than before. From these images it is not possible to infer the dimensions of the ring, since there is no "standard candle".
Alessio- Posts : 127
Join date : 2008-11-07
Age : 52
Location : Rome
Similar topics
» Matlab images of the NI ring
» Scheme of reading to 4-wire for thermometer (PT100) - Application and Features
» NI ring alignment shift 28 Jan 2009
» WI TCS beam alignment on ITM
» NI ring adjustment
» Scheme of reading to 4-wire for thermometer (PT100) - Application and Features
» NI ring alignment shift 28 Jan 2009
» WI TCS beam alignment on ITM
» NI ring adjustment
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|