Optimized heating profile for the CP, when CP and TM are 20cm distant, RH also around CP
Page 1 of 1
Optimized heating profile for the CP, when CP and TM are 20cm distant, RH also around CP
With respect to the "Standard" TCS configuration, I added a RH around the CP, the RH is generating 2W. I also added a shield to prevent the test mass to "see" the CP ring heater. Results are as usual very good and they seem to converge more rapidly than usual.
First figure: heating profiles as a function of the iteration number. Second figure: corresponding OPL increase. Best coupling losses are 13ppm...
First figure: heating profiles as a function of the iteration number. Second figure: corresponding OPL increase. Best coupling losses are 13ppm...
Alessio- Posts : 127
Join date : 2008-11-07
Age : 52
Location : Rome
Similar topics
» Optimized heating profile for the CP, when CP and TM are 20cm distant
» Optimized heating profile for the CP, when CP and TM are infinitely distant
» Attenuator for Central Heating
» Calibration of the Attenuator (Central Heating)
» Central Heating attenuator holder preliminary design
» Optimized heating profile for the CP, when CP and TM are infinitely distant
» Attenuator for Central Heating
» Calibration of the Attenuator (Central Heating)
» Central Heating attenuator holder preliminary design
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum